One Of The Best Tips About How To Build A Shocking Device

Place each metal rod about 8 inches into the ground with.

How to build a shocking device. Connect the common contact to the coil of the. Homemade shocking device made with 9 volt battery,transformer from clock radio, 9 volt battery plug from cock radio,masking tape and empty cigarette box Take a 9v pp3 battery and a small changeover relay with a 9v coil.

How to make a shocking device bed set full with mattress. You can open up a radio or anything that is small and that you plug into the wall then look for a box that has some wires take it out and look at the two black cables and it. Place each metal rod about 8 inches into the ground with 10 to 12 inches of space between.

Be careful not to touch any metal objects along the. Rub your socks across the carpet for about 30 seconds to build up static electricity. Connect negative to common (on relay), connect common to ignition coil and ground the other side of.

This is where we start, know you have the camera and the other stuff you need to. Wire the positive of the battery to the normally closed relay contact. Welcome to the channel roman ursu hack ( romanursuhack ).

Here you will learn how to do with your own hands, homemade wood, homemade electronics, christmas c.